Ptm Required Tools - Compaq StorageWorks ESL9000 Series Installation Manual

1-4 Compaq StorageWorks Pass-Through Mechanism Installation Guide

PTM Required Tools

The following tools are required to perform the PTM installation procedure:
I
12-inch straight edge ruler
I
#2 Phillips screwdriver
I
5/16-inch open-end wrench
I
Torque wrench capable of 30-in/lb with #2 Phillips bit, 5/16-inch
socket, and 4-inch minimum extension
I
Torque wrench capable of 70-in/lb with 7/16-inch socket and 2-inch
minimum extension
I
Torque wrench capable of 5-in/lb with 5/32-inch socket
I
1/4-inch drive ratchet with 1/4-inch socket
I
12-inch level
I
Level (2 ft or longer)
I
Flashlight