Table 3-5 Ptm Cable Connection - Compaq StorageWorks ESL9000 Series Installation Manual

PTM Cable Connection
Figure Legend Description
1 Connector (PTM shown outside of tape library for
clarity)
10. Route the cable through the clips provided on the bottom of the PTM.
Push the excess cable through the cable hole in the bin wall.
11. Attach the pass-through cable cover (P/N 6312061) with four screws
(P/N 0905057) with washers (P/N 0685023) to the bin wall to cover the
cable and cable hole (see Figure 3-6). Tighten the screws to a torque
value of 30 ± 3-in/lb.
Table 3-5
Installing the PTM 3-7