Figure 5-3. Configure Multi-Unit Screen - Compaq StorageWorks ESL9000 Series Installation Manual

5-6 Compaq StorageWorks Pass-Through Mechanism Installation Guide
System
Configure: Multi-Unit
Off-line
Library Type:
Standby
Library Unit #:
Load Port
# of Libraries:
LUN Config:
O
Stop

Figure 5-3. Configure multi-unit screen

2. Press the Select button to access the option to configure.
3. Using the Arrow buttons, scroll through the available values for the
selected option.
4. When the desired value appears, press the Select button to advance to
the next option.
5. When you have finished making changes to the multi-unit configuration
options, press the Change button to save the options and complete the
configuration.
6. Repeat Steps 1 through 5 for each tape library unit.
NOTE: Any unit can be designated the master, but only one master unit can exist. If
changing which unit is master, first make that unit a slave unit and then reconfigure the
new unit as master.
Back Forward
Operator Service
SINGLE
SINGLE LUN
Home
Multi
Unit
Select
Change