Cabling Instructions; Table 4-1 Ptm Connector Locations - Compaq StorageWorks ESL9000 Series Installation Manual

4-2 Compaq StorageWorks Pass-Through Mechanism Installation Guide

Cabling Instructions

1
To cable the tape libraries:
1. Open the rear access doors of the tape libraries being connected.
2. Locate the Queued Serial Peripheral Interface (QSPI) connectors on the
bottom of the PCI chassis (see Figure 4-1).
2
Figure 4-1. PTM connector locations
PTM Connector Locations
Figure Legend Description
1
Left QSPI connector
2
Right QSPI connector
3
PCI chassis
3
Table 4-1