Installation Instructions; Table 3-1 Bin Locations - Compaq StorageWorks ESL9000 Series Installation Manual

3-2 Compaq StorageWorks Pass-Through Mechanism Installation Guide

Installation Instructions

To install the PTM assembly:
1. Remove the top three tape cartridge bins from the left columns of the
right tape library (see Figure 3-1). Save all hardware for reinstallation at
a later time.
Figure 3-1. Bin locations
Figure Legend Description
Tape cartridge bins (to be removed)
1
Tape cartridge bins (to be removed)
2
Tape cartridge bins (to be removed)
3
Table 3-1
Bin Locations
1 2 3