Calibrating The Tape Library Pass-Through Elements - Compaq StorageWorks ESL9000 Series Installation Manual

Calibrating the Tape Library Pass-Through
Elements
The CALIBRATE ALL PTMs command lets you calibrate all PTMs in all of
the tape libraries in the multi-unit configuration. Calibrate the tape libraries
during the initial installation and after any maintenance procedure.
To calibrate all PTM tape library elements:
1. From the master tape library in the multi-unit configuration, press the
Multi-Unit option.
The Multi-Unit screen appears (see Figure 5-1).
NOTE: Multi-unit calibration must be executed from the master tape library designated
during multi-unit configuration.
2. Press the Calibrate All PTMs button.
A Command in Progress screen appears while the calibration process is
in progress.
PTM Configuration and Calibration 5-7