4
6
Figure 5-5. Library numbering (from diagnostic port)
Figure Legend
0
1
2
3
4
5
6
6. From the Multi Unit Configuration menu, select Configure Total
Number of Units and select 1 through 5 for the number of tape libraries
in the system.
7. From the Multi Unit Configuration menu, select Multi-Unit Enable
button to enable the multi-unit function.
8. Repeat steps 1 through 7 for all tape libraries in the system.
3
2
Table 5-2
Tape Library Numbering
(From Diagnostic Port)
Description
Tape library 0
Tape library 1
Tape library 2
Tape library 3
Tape library 4
Left-hand side
Right-hand side
PTM Configuration and Calibration 5-11
1
0
5