Projecting A Waypoint; Navigation Settings; Customizing Navigation Data Screens; Heading Settings - Garmin INSTINCT 2X Owner's Manual

Projecting a Waypoint

You can create a new location by projecting the distance and bearing from your current location to a new
location.
NOTE: You may need to add the Project Wpt. app to the activities and apps list.
1 From the watch face, press GPS.
2 Select Project Wpt..
3 Press UP or DOWN to set the heading.
4 Press GPS.
5 Press DOWN to select a unit of measure.
6 Press UP to enter the distance.
7 Press GPS to save.
The projected waypoint is saved with a default name.

Navigation Settings

You can customize the map features and appearance when navigating to a destination.

Customizing Navigation Data Screens

1 Hold MENU.
2 Select Navigation > Data Screens.
3 Select an option:
• Select Map > Status to turn on or off the map.
• Select Map > Data Field to turn on or off a data field that shows routing information on the map.
• Select Elevation Plot to turn on or off the elevation plot.
• Select a screen to add, remove, or customize.

Heading Settings

You can set the behavior of the pointer that appears when navigating.
Hold MENU, and select Navigation > Type.
Bearing: Points in the direction of your destination.
Course: Shows your relationship to the course line leading to the destination.

Setting Navigation Alerts

You can set alerts to help you navigate to your destination.
1 Hold MENU.
2 Select Navigation > Alerts.
3 Select an option:
• To set an alert for a specified distance from your final destination, select Final Distance.
• To set an alert for the estimated time remaining until you reach your final destination, select Final ETE.
• To set an alert when you stray from the course, select Off Course.
4 If necessary, select Status to turn on the alert.
5 If necessary, enter a distance or time value, and select
88
.
Navigation