Calculate:marker<N>[:Set]:Delta:center; Calculate:marker<N>[:Set]:Rlevel - Rigol SA5000 Series Programming Manual

Chapter 2 Command System
If the specified marker mode is Delta, the center frequency will be set to the frequency of the Delta marker.
Example
The following command sets the center frequency to the frequency of Marker 1 (Position).
:CALCulate:MARKer1:SET:CENTer
:CALCulate:MARKer<n>[:SET]:DELTa:CENTer
Syntax
:CALCulate:MARKer<n>[:SET]:DELTa:CENTer
Description
Sets the center frequency of the analyzer to half of the frequency difference (absolute frequency) between
the two Delta markers.
Parameter
Name
<n>
Remarks
It is only valid when the current marker mode is "Delta".
Example
The following command sets the center frequency of the analyzer to half of the frequency difference
between the two Delta markers.
:CALCulate:MARKer1:SET:DELTa:CENTer
:CALCulate:MARKer<n>[:SET]:RLEVel
Syntax
:CALCulate:MARKer<n>[:SET]:RLEVel
Description
Sets the reference level of the analyzer to the amplitude of the specified marker.
Parameter
Name
<n>
Remarks
If the marker mode of the specified marker is Position or Fixed, the reference level will be set to the
amplitude of the marker.
If the specified marker mode is Delta and the current marker is the reference marker, then the reference
level is set to the amplitude of the reference marker; if the current marker is the Delta marker, then the
reference level is set to the amplitude of the Delta marker.
Example
The following command sets the reference level of the analyzer to the amplitude of Marker 2 (Position).
:CALCulate:MARKer2:SET:RLEVel
VSA Programming Guide
Type
Discrete
Type
Discrete
Range
1|2|3|4|5|6|7|8
Range
1|2|3|4|5|6|7|8
Default
--
Default
--
RIGOL
2-13