Table of Contents
Advertisement
RIGOL
Document Overview
This manual introduces how to program and control RIGOL RSA5000 series spectrum analyzer (VSA mode)
by using SCPI commands through the USB or LAN interface.
Main Topics in this Manual:
Chapter 1 Programming Overview
This chapter introduces how to set up remote communication between the spectrum analyzer and the PC,
the remote control methods, the syntax, symbols, parameters, and abbreviation rules of the SCPI
commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameters, and usage of each command in VSA mode for the
RSA5000 series.
Tip
For the latest version of this manual, download it from the official website of RIGOL (www.rigol.com).
Format Conventions in this Manual:
1.
Keys:
The keys on the front panel are usually denoted by the format of "Key Name (Bold) + Text Box". For
example, FREQ denotes the FREQ key.
2.
Menu Keys:
The menu softkeys are usually denoted by the format of "Menu Word (Bold) + Character Shading". For
example, Center Freq denotes the center frequency menu item under the FREQ function key.
3.
Connectors:
The connectors on the front or rear panel are usually denoted by the format of "Connector Name (Bold)
+ Square Brackets (Bold)". For example, [Gen Output 50Ω].
4.
Operation Procedures:
indicates the next step of operation. For example, FREQ Center Freq indicates pressing FREQ
on the front panel and then pressing the menu softkey Center Freq.
Content Conventions in this Manual:
The RSA5000 series spectrum analyzer includes the following models. Unless otherwise specified, this
manual takes RSA5065 as an example to illustrate the usage of each command.
Model
RSA5065
RSA5032
RSA5065-TG
RSA5032-TG
II
Frequency Range
9 kHz to 6.5 GHz
9 kHz to 3.2 GHz
9 kHz to 6.5 GHz
9 kHz to 3.2 GHz
TG
None
None
6.5 GHz
3.2 GHz
VSA Programming Guide
Advertisement
Table of Contents
