Table of Contents
Advertisement
RIGOL
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:NEXT
:CALCulate:DDEMod:MARKer<n>:MAXimum:PREVious
Syntax
:CALCulate:DDEMod:MARKer<n>:MAXimum:PREVious
Description
Searches for the peak whose amplitude on the trace is next higher than that of the current peak and marks
it with the specified marker.
Parameter
Name
<n>
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next higher peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:PREVious
:CALCulate:DDEMod:MARKer<n>:MAXimum:RIGHt
Syntax
:CALCulate:DDEMod:MARKer<n>:MAXimum:RIGHt
Description
Searches for the nearest peak which is located at the right side of the current peak and marks it with the
specified marker.
Parameter
Name
<n>
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one right peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:RIGHt
:CALCulate:DDEMod:MARKer<n>:MINimum
Syntax
2-8
Type
Discrete
Type
Discrete
Range
1|2|3|4|5|6|7|8
Range
1|2|3|4|5|6|7|8
Chapter 2 Command System
Default
--
Default
--
VSA Programming Guide
Advertisement
Table of Contents
