System:preset:type; System:preset:user:save; System:scpi:display - Rigol SA5000 Series Programming Manual

RIGOL

:SYSTem:PRESet:TYPE

Syntax
:SYSTem:PRESet:TYPe FACTory|USER1|USER2|USER3|USER4|USER5|USER6
:SYSTem:PRESet:TYPe?
Description
Selects the preset type of the system to the factory mode or any one of the items from User1 to User6.
Queries the preset type of the system.
Parameter
Name Type
-- Keyword
Return Format
The query returns FACT, USER1, USER2, USER3, USER4, USER5, or USER6.
Example
The following command sets the preset type of the system to User5.
:SYSTem:PRESet:TYPe USER5
The following query returns USER5.
:SYSTem:PRESet:TYPe?

:SYSTem:PRESet:USER:SAVE

Syntax
:SYSTem:PRESet:USER:SAVE
Description
Saves the current user setting.
Remarks
If the current preset type is "FACTory", save the current user setting to User1. If the current preset type is
"User1 through User6", save the current user setting to the specified user.

:SYSTem:SCPI:DISPlay

Syntax
:SYSTem:SCPI:DISPlay OFF|ON|0|1
:SYSTem:SCPI:DISPlay?
Description
Enables or disables the SCPI display.
Queries the setting status of the SCPI display.
Parameter
Name Type
-- Bool
Remarks
When you use the SCPI commands to control the instrument remotely, turning on the SCPI Display will go
to the specified menu of the corresponding command; turning off the SCPI Display will not go to the
specified menu.
2-76
FACTory|USER1|USER2|USER3|USER4|USER5|USER6
OFF|ON|0|1
Range
Range
Chapter 2 Command System
Default
FACTory
Default
OFF|0
VSA Programming Guide