Calculate:marker<N>[:Set]:Stop - Rigol SA5000 Series Programming Manual

RIGOL
Chapter 2 Command System
:CALCulate:MARKer<n>[:SET]:STOP
Syntax
:CALCulate:MARKer<n>[:SET]:STOP
Description
Sets the stop frequency of the analyzer to the frequency of the specified marker.
Parameter
Name Type Range Default
<n> Discrete 1|2|3|4|5|6|7|8 --
Remarks
If the marker mode of the specified marker is Position or Fixed, the stop frequency will be set to the
frequency of the marker.
If the specified marker mode is Delta, the stop frequency will be set to the frequency of the Delta marker.
Example
The following command sets the stop frequency of the analyzer to the frequency of Marker 2 (Position).
:CALCulate:MARKer2:SET:STOP
VSA Programming Guide 2-15