RIGOL
Return Format
The query returns the mask parameters that are being edited currently in scientific notation.
Example
The following command edits the two points of the upper mask.
:TRIGger:SEQuence:FMT:MASK1:DATA –80000000, –50, 80000000, –50
The following query returns –8.000000e+07, –5.000000e+01, 8.000000e+07, –5.000000e+01
:TRIGger:SEQuence:FMT:MASK1:DATA?
:TRIGger[:SEQuence]:FMT:MASK<n>:DELete
Syntax
:TRIGger[:SEQuence]:FMT:MASK<n>:DELete
Description
Deletes the specified mask.
Parameter
Name
<n>
Discrete
Remarks
When <n> is set to 1, edit the upper mask; when set to 2, edit the lower mask.
This command is only valid when you select FMT to be the trigger source.
:TRIGger[:SEQuence]:FMT:MASK<n>:NAME
Syntax
:TRIGger[:SEQuence]:FMT:MASK<n>:NAME <string>
:TRIGger[:SEQuence]:FMT:MASK<n>:NAME?
Description
Saves the FMT file with a specified filename suffixed with ".csv" to the default path (/"mode name"/mask).
Queries the currently saved FMT filename.
Parameter
Name
<n>
Discrete
<string>
ASCII String
Remarks
If the specified file already exists, overwrite it.
When <n> is set to 1, edit the upper mask; when set to 2, edit the lower mask.
Example
The following command saves the upper mask FMT file with the filename (mask1.csv) to the "/vsa/mask"
folder.
:TRIGger:SEQuence:FMT:MASK1:NAME mask1
The following query returns mask1.
:TRIGger:SEQuence:FMT:MASK1:NAME?
2-88
Type
Type
Range
Default
1|2
Range
Default
1|2
——
Chapter 2 Command System
——
——
——
VSA Programming Guide