[:Sense]:Ddemod:fsk:deviation:reference:auto; [:Sense]:Ddemod:load:knowndata - Rigol SA5000 Series Programming Manual

RIGOL
Example
The following command sets the reference frequency offset to 1 MHz.
:SENSe:DDEMod:FSK:DEViation:REFerence 1000000
The following query returns 1.000000000e+06.
:SENSe:DDEMod:FSK:DEViation:REFerence?

[:SENSe]:DDEMod:FSK:DEViation:REFerence:AUTO

Syntax
[:SENSe]:DDEMod:FSK:DEViation:REFerence:AUTO ON|OFF|1|0
[:SENSe]:DDEMod:FSK:DEViation:REFerence:AUTO?
Description
Enables or disables the reference frequency offset mode in the FSK modulation.
Queries the status of the reference frequency offset mode in the FSK modulation.
Parameter
Name
--
Remarks
ON|1: indicates that Auto mode is selected.
OFF|0: indicates that Manual mode is selected.
This command is only valid when you select FSK as the modulation format.
Return Format
The query returns 0 or 1.
Example
The following command sets the reference frequency offset mode in the FSK modulation to Auto.
:SENSe:DDEMod:FSK:DEViation:REFerence:AUTO ON
or :SENSe:DDEMod:FSK:DEViation:REFerence:AUTO 1
The following query returns 1.
:SENSe:DDEMod:FSK:DEViation:REFerence:AUTO?

[:SENSe]:DDEMod:LOAD:KNOWndata

Syntax
[:SENSe]:DDEMod:LOAD:KNOWndata <path>
[:SENSe]:DDEMod:LOAD:KNOWndata?
Description
Loads the BER test file from the specified path.
Queries the BER test file.
Parameter
Name Type
<path> Consecutive Real Number
Remarks
Before performing the BER test, load the BER test reference file (.xml) first.
<path> should contain the path and the filename.
2-50
Type
Bool
Chapter 2 Command System
Range
OFF|ON|0|1
Range
--
Default
ON|1
Default
--
VSA Programming Guide