Trigger[:Sequence]:Fmt:criteria; Trigger[:Sequence]:Fmt:delay - Rigol SA5000 Series Programming Manual

RIGOL
Chapter 2 Command System
Remarks
When the parameter n is set to 1, it indicates External Trigger 1; when set to 2, it indicates External Trigger
2.
POSitive: indicates the rising edge.
NEGative: indicates the falling edge.
Return Format
.
The query returns POS or NEG
Example
The following command sets the trigger edge of External Trigger 1 to POSitive.
:TRIGger:SEQuence:EXTernal1:SLOPe POSitive
The following query returns POS.
:TRIGger:SEQuence:EXTernal1:SLOPe?

:TRIGger[:SEQuence]:FMT:CRITeria

Syntax
:TRIGger[:SEQuence]:FMT:CRITeria ENTer|LEAVe|INSide|OUTSide|ELEave|LENTer
:TRIGger[:SEQuence]:FMT:CRITeria?
Description
Sets the trigger criteria for FMT.
Queries the trigger criteria for FMT.
Parameter
Name Type Range Default
—— Keyword ENTer|LEAVe|INSide|OUTSide|ELEave|LENTer ENTer
Remarks
This command is only valid when you select FMT to be the trigger source.
Return Format
The query returns ENT, LEAV, INS, OUTS, ELE, or LENT.
Example
The following command sets the trigger criteria for FMT to Enter.
:TRIGger:SEQuence:FMT:CRITeria ENTer
The following query returns ENT.
:TRIGger:SEQuence:FMT:CRITeriar?

:TRIGger[:SEQuence]:FMT:DELay

Syntax
:TRIGger[:SEQuence]:FMT:DELay <time>
:TRIGger[:SEQuence]:FMT:DELay?
Description
Sets the delay time for FMT.
Queries the delay time for FMT.
VSA Programming Guide 2-83