3. Before Installing the System
Removing the Cover
1. Move the main box to a convenient place as close as possible to the installation
location.
2. Separate the top cover after removing the strapping bands.
3.
Lift a small distance remove the side covers.
4.
Remove the plastic wrap covering the box by using a cutter.
5.
Remove the component boxes and packing materials in the sequence, as
shown in the figure.
28
PC Box
①
Main Bottom EPS
②
Accessory Box #1, #2
③
Monitor Box
④
When you are removing the side cover, another person must
hold the box to prevent the parts from
falling.
Green 16/18 Installation Manual