Table of Contents
Advertisement
3 - Description
AutoTerrain
When the AutoTerrain function is installed, sensors placed on the boom are used to adjust the angle of each boom side
relative to the terrain.
To spray efficiently on hilly terrain, it is important to adjust the boom to be parallel to the terrain.
AutoSlant (Optional)
When the AutoSlant function is installed, sensors placed on the boom are used to adjust the main slant angle of the boom
relative to the terrain.
To spray efficiently on hilly terrain, it is important to adjust the boom to be parallel to the terrain.
ParaLift Hydraulics
The ParaLift hydraulics:
• Has a lift range of 230 cm, from 40 to 270 cm nozzle height above the ground.
• Automatically locks when the boom is lowered into transport position.
• Is suspended during work, but not when the boom is in storage position.
• Lowering speed can be adjusted.
μ
ATTENTION! The ParaLift lock bracket must be locked when servicing the boom or during storage for longer periods.
Refer to "ParaLift Lock Bracket" on page 74 for correct fitting and removing procedure.
68
Advertisement
Table of Contents
