Table of Contents
Advertisement
4 - Sprayer Setup
Link Arm
The link arm is a combination of several interchangeable components, this allows to change from one track width to an
other without having to buy a complete link arm.
The link arm consist of the following components:
1. Ball Joint Straight
2. Counter Nut
3. Adaptor (Long / Short)
4. Ball Joint 90 degree (Long / Short)
÷
NOTE! Consult the charts below to verify what components are needed when changing from one track width to an
other. The straight ball joint and the locking nut are always present and identical for link arm 1 to 7. They can be
reused unless damaged.
Link arm components - narrow axle housing
±
WARNING! Do not exceed a track width of more than 2000mm when using the narrow axle housing.
92
Ball joint S
Ball joint L
Adaptor S
Adaptor L
Ball joint
Mandatory
Advertisement
Table of Contents
