Materials and Recycling
Disposal of the Sprayer
You must thoroughly clean the equipment when it has completed its working life.
Incinerate the tanks, hoses and synthetic fittings at an authorized disposal plant.
It is possible to scrap the metallic parts. Steel parts are made of various types of treated steel.
Always follow local legislation regarding disposal.
Materials Used
Parts
Tanks:
Chassis:
Boom:
Boom, breakaway section:
Tyres:
Mudguards:
Pump housing:
Pump diaphragms:
Hoses (suction lines):
Hoses (pressure lines):
Valves:
Hose and pipe fittings:
Filter housings:
Nozzles:
Disposal of Cleaning Water
Protect the environment.
When cleaning the sprayer inside and outside, dispose of chemical residues in the liquid system and water containing
cleaning agent according to local regulations.
Materials
Plastic (HDPE)
Steel
Steel, aluminium
Steel, aluminium, carbon/epoxy compound
Rubber
Plastic (PE)
Grey cast iron (GG200)
Plastic (PUR)
Plastic (PVC)
Rubber (EPDM)
Glass reinforced plastic (PA)
Glass reinforced plastic (PA)
Plastic (PP)
Plastic (POM)
8 - Technical Specifications
201