Table of Contents
Advertisement
8 - Technical Specifications
Hydraulics
Hydraulic System
Max. operating temperature
Max. operating pressure from the tractor
Min. operating pressure from the tractor
Max. flow from tractor
Min. flow from tractor @ 200 bar
Max. oil filter rating
* Depending on scope of supply.
€
DANGER! If exceeding one or more the values, this may cause damage and sudden leaks on the sprayer. Risk of injuries
and fatal accidents.
Hydraulic Oil
For the tractor supply oil to the sprayer, the requirement for filtering must follow ISO 4406 20/14 as a minimum. The filter
must remove particles bigger than 10 micron in size from the oil (Filtration quotient ß25-75, ISO 16889 Multipass test).
• Follow the tractor oil-change schedule as directed.
• Choose hydraulic oil with anti-foam and anti-oxidant additives.
Be cautious when using the tractor transmission oil for the sprayer hydraulics. Consult the tractor dealer if in doubt.
Type
Hydraulic oil with anti-foam and antioxidant additives.
Purity
ISO 4406 20/14. Filtration quotient ß25-75, ISO 16889.
Multipass test
10 micron absolute.
Viscosity
Minimum: 10 mm²/s (cSt).
Maximum:100 mm²/s (cSt).
At normal operation:15 - 35 mm²/s (cSt).
Brakes
Hydraulic Brakes
Max. hydraulic oil pressure
Min. hydraulic oil pressure
Max. hydraulic oil flow
Min. hydraulic oil flow
μ
ATTENTION! The hydraulic circuit for the brakes is different from the general hydraulic circuit.
Air Brakes
Max. pressure in the pneumatic system
Min. pressure in the pneumatic system
Max. flow in the pneumatic system
Min. flow in the pneumatic system
±
WARNING! The brakes can be released at a pressure as low as 3.5 bar, always take precaution to prevent the trailer
from rolling.
200
80 °C
210 bar
180 bar
120 l/Min
50 - 80 l/Min*
10 μm
150 bar
120 bar
30 litres/min
10 litres/min
8.5 bar
6.5 bar
No limit
2 litres/min
Advertisement
Table of Contents
