Table of Contents
Advertisement
3 - Description
Hydraulic System
Hydraulic Blocks
Hydraulic blocks installed on the sprayer are described below.
The hydraulic block placed on the rear frame, between the wheels consist of the following modules:
A. Distribution to the Spray Boom Hydraulic Block.
B. ParaLift Hydraulics.
This hydraulic block distributes hydraulic fluid for the ParaLift when
raising or lowering the spray boom.
C. Hydraulic Inlet Module.
Adjust the inlet module depending on the hydraulic system of the
tractor:
• Open Centre.
• Closed Centre, pressure compensated.
• Closed Centre, using Load Sensing.
For adjustment, see "Open or Closed Centre Hydraulics" on page 79.
If in doubt whether your tractor uses open or closed centre hydraulics, see the tractor instruction book or ask your
tractor dealer.
D. ComfortTrack Hydraulics.
This hydraulic block distributes hydraulic fluid for the ComfortTrack wheel steering functions.
Spray Boom Hydraulic Block
The main hydraulic block which distributes hydraulic fluid for the boom
controls.
This hydraulic block also redistribute hydraulic fluid for the AutoTerrain
hydraulic block.
62
Advertisement
Table of Contents
