Intermec EasyCoder PF4i User Manual page 74

EasyCoder PF4i User's Guide (IPL Version)
To return to factory default setup using the keyboard
1 Lift the printhead.
2 Switch on the power to the printer and press the <i> key and
wait until the printer beeps.
3 Swiftly press the following keys.
4 The following message will be displayed:
5 Within 10 seconds, press Enter to reset the printer to factory
default. The parameters will be reset and the printer will
continue the normal startup.
If you press
has passed, the normal startup process will continue without
any reset being performed.
Note: Resetting to the factory default will reset all files used to
store settings, but it does not affect settings that were already
loaded before the files were removed. This means that, for
example, EasyLAN Wireless settings (SSID, keys, etc.) retain
their values until the next reboot. To reload all settings, reset the
printer to the factory defaults and then reboot it.
Chapter 5 — Setting Up the Printer
or wait until the 10 seconds time-out
59