Navigating In Setup Mode - Intermec EasyCoder PF4i User Manual

Chapter 6 — Setup Mode

Navigating in Setup Mode

62
Enter the Setup Mode by pressing the Setup key on the printer's
front panel. Text in the display guide you through the setup
procedure. Use the printer's keyboard to navigate menus,
acknowledge displayed values, or select or enter new values.
Move one step back on the same level.
Move up one level without changing the setting.
Move forward on the same level.
Move down one level.
Acknowledge and move to next menu.
Exit Setup Mode. Can be used anywhere in Setup Mode.
Setup Mode is organized as an endless loop with a number of
sub-categories. At startup, the firmware determines if an
EasyLAN interface board is installed in the printer. If so, the
Network setup menus are shown in the Setup Mode.
The diagram below shows the options in the main loop. Detailed
overviews are shown on the following pages.
EasyCoder PF4i User's Guide (IPL Version)