Setup Parameters; Serial Communication; Baud Rate; Data Bits - Intermec EasyCoder PF4i User Manual

Setup Parameters

Serial Communication

EasyCoder PF4i User's Guide (IPL Version)
The serial communication parameters control the
communication between the printer and the connected computer
or other devices on the serial port.
Note: The serial communication parameters have no effect on
parallel or EasyLAN communications.
Make sure the printer's communication parameters match the
parameters set up on the connected device and vice versa. If the
printer and host setups do not match, the response from the
printer to host will be garbled.

Baud Rate

The baud rate is the transmission speed in bits per second. There
are 8 options:
• 1200
• 2400
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200

Data Bits

Data bits specifies the number of bits that will define a character.
• 7 Characters ASCII 000 to 127 decimal
• 8 Characters ASCII 000 to 255 decimal (default)

Parity

The parity decides how the firmware will check for transmission
errors. There are four options: None (default), Even, Odd, and
Space.
Chapter 5 — Setting Up the Printer
51