Overview; Dtp Model - Intermec EasyCoder PF4i User Manual

Chapter 7 — Options

Overview

Printhead spring
Label taken sensor
Paper cutter
Short side door
Cutter tray
Long side door

DTP Model

68
The EasyCoder PF4i printer provides a high degree of flexibility
because it has a modular design. By adding options to the basic
printer, the EasyCoder PF4i printer can be adapted for a variety
of applications. Some options should be installed by an
authorized service technician or are only available as factory-
installed options.
Covers
Transfer ribbon
Long side door
mechanism
with 8-in. Megatop
In the dedicated direct thermal printing (DTP) model, the
thermal transfer ribbon mechanism is omitted. The printer's
default setup changes to direct thermal printing and setup
parameters for thermal transfer printing are not displayed.
Interface board
(various types)
Thick media
printhead
EasyCoder PF4i User's Guide (IPL Version)
Media supply
roll post
1.5inch rotating
supply hub
3-inch adapter
Liner takeup
and guide shaft
Quick-Load
guides (included)