GE Concord 4 Installation Manual page 39

Figure 27: Programming touchpad
Programming touchpad
Programming touchpad cable (60-791)
In program mode, touchpad buttons let you navigate to all installer programming
menus for configuring the system. Table 8 below describes the touchpad button
functions in program mode.
Table 8: Touchpad programming functions
Button
#
*
A ( )
B ( )
C
D
0 to 9
1 and 2
1 to 6
7 and 9
Concord 4 Installation Manual
Programming touchpad
connector
Programming function
Select menu item or data entry.
Deselect menu item or cancel data entry (if pressed before #).
Scroll through available options at the current menu tier. Also, scroll
through sensor text options during sensor text programming.
Enter pauses when programming phone numbers.
Delete certain programmed settings.
Enter numeric values wherever needed.
Select off (1) or on (2) wherever needed.
Press and hold to enter alphabetical characters A through F for account
numbers
Press and hold to enter * (7) or # (9) for phone numbers.
Chapter 3: Programming
33