GE Concord 4 Installation Manual page 26

Hide thumbs Also See for Concord 4:
Table of Contents

Advertisement

Chapter 2: Installation
Interrogator 200 audio verification module
A maximum of two audio veification modules (AVM) are allowed (partition 1 only).
Connect the Interrogator 200 AVM to the panel terminals as shown in Figure 13
below. Use shielded cable to prevent crosstalk between the speaker and microphone.
Figure 13: Connecting an Interrogator 200
Panel terminals
Audio verification
module
Caution:
If a speaker is already connected to panel terminals 7 and 8, the
Interrogator 200 speaker must be hooked up in series with that speaker to provide a
16-ohm load. Hooking up speakers in parallel to panel terminals 7 and 8 creates a 4-
ohm load that can cause permanent damage to the panel.
20
SPKR SPKR
+12V
Yellow
MIC
GND
Splice
Concord 4 Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Concord 4 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents