Load Box - PRONAR T780 Translation Of The Original Instructions

The height of drawbar attachment can be adjusted by moving the bracket fixing the spring to
the drawbar.
Tandem axle suspension with absorber springs is mounted in the rear part of the frame –
figure (3.2A). It is composed of rocker arm (1) and taper leaf springs (2). The whole assembly
is connected using pins (3), (4) and (5).
DRAWING 3.2A REAR SUSPENSION
(1) rocker arm, (2) taper leaf spring, (3) rocker arm pin, (4), (5) spring pins

3.3 LOAD BOX

Trailer's load box - Figure (3.3A) - consists of: upper frame (1), load box walls 800 mm (2),
wall extensions 600 mm (3) and add additional accessories including fenced platform (4) and
frame with canvas cover. Three different versions of walls (2) are available:
• No grain chute openings – standard,
• grain chute openings on the left side,
• grain chute openings on the right side,
The trailers of standard fittings include 600 mm wall extensions(3). Walls and wall extensions
are connected with each other using linking cables (8).
3.5