Dimensions And Weights - Siemens 8DJH Installation And Operating Instructions Manual

4.8 Dimensions and weights

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH
Degrees of protection
The panels fulfill the following degrees of protection according to IEC 62271-200, IEC 60529 and
DIN VDE 0671-200:
▪ IP2X (standard) for parts under high voltage
– for air-insulated metering panels
– for panels with HV HRC fuses
▪ IP3X (option) for the switchgear enclosure of the operating front and the side walls
▪ IP3X (standard, option: IP4X) for low-voltage compartments
▪ IP65 for parts under high voltage
– for panels without HV HRC fuses
– for switchgear without air-insulated metering panels
Transport regulations
According to "Annex A of the European Agreement Concerning the International Carriage of
Dangerous Goods by Road (ADR)" launched on September 30, 1957, Siemens gas-insulated
medium-voltage switchgear does not belong to the category of dangerous goods in respect of
transportation, and is exempted from special transport regulations according to ADR,
Clause 1.1.3.1 b).
The switchgear weight depends on the switchgear design and the degree to which it is
equipped. The table shows mean values.
Tab. 31: Weight of individual panels
Panel type Width
[mm]
R 310
R(500) 500
K 310
K(E) 430
T 430
L 430
L (type 1.1) without 500
4MT3
L (type 2) 500
M(SK/SS/KS) 840
M(KK) 840
M(500) incl. 3x4MT3 500
S 430
S(500) 500
S(620) 620
H 430
V 500
E 310
E(500) 500
Gross weight for a switchgear height of
1200 mm 1400 mm
approx. [kg] approx. [kg]
100 110
140 150
100 110
130 140
135 145
130 140
210 220
160 170
- 370
- 270
230 240
130 140
150 160
200 220
135 145
240 250
100 110
140 150
Technical data | 4
Low-voltage
compartment
1700 mm 600 mm
approx. [kg] approx. [kg]
120 40
170 60
120 40
160 50
160 50
155 50
240 60
190 60
400 70
300 70
260 60
160 50
180 60
240 45
160 50
270 60
120 40
170 60
35/174