About These Instructions; Symbols Used; Instruction Concept - Siemens 8DJH Installation And Operating Instructions Manual

1 About these Instructions

1.1 Symbols used

1.2 Instruction concept

6/174
For reasons of clarity, these instructions do not purport to cover all details or variations in the
equipment. They do also not provide for every possible contingency to be met in connection
with installation or operation. For details about technical design and equipment like for example
technical data, secondary equipment and circuit diagrams, please refer to the order documents.
The product is subject to continuous technical development within the scope of technical
progress. If not stated otherwise on the individual pages of these instructions, we reserve the
right to modify the specified values and drawings. All dimensions are given in mm. Should
further information be desired or should particular problems arise which are not covered
sufficiently by these instructions, the matter should be referred to the Siemens Service Hotline.
The contents of these instructions shall not become part of or modify any prior or existing
agreement, commitment or relationship. The Sales Contract contains the entire obligations of
Siemens. The warranty contained in the contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not create new warranties or modify the existing
warranty.
The illustrations included in these instructions are simplified and serve to create a general
understanding. The illustrations may therefore deviate from the actual product.
☒ Precondition symbol: Identifies a necessary precondition for an operation.
1. Numbered operation instruction: Identifies an operation step. Asks the operator to perform
an operation.
✓ Result symbol: Identifies the result of an operation or the intermediate result after an oper-
ation step.
⇨ Measures symbol: Identifies measures to avoid hazards, or important information and facil-
itations of work.
These instructions contain information which must be adhered to for personal safety and to
avoid property damage. The signal words "DANGER", "WARNING", "CAUTION" and "ATTENTION"
used in these instructions indicate the degree of hazard in descending order that may be
encountered by the user.
Indicates a life-endangering situation.
If this hazardous situation is not avoided, death or serious injury will be the consequence.
⇨ Observe measures for the prevention of risks.
Indicates a life-endangering situation.
If this hazardous situation is not avoided, death or serious injury can be the consequence.
⇨ Observe measures for the prevention of risks.
Indicates a potentially hazardous situation.
If this hazardous situation is not avoided, light or moderate injury can be the consequence.
⇨ Observe measures for the prevention of risks.
8DJH • Installation and Operating Instructions • Version 11 • 500-8384.9
DANGER
WARNING
CAUTION