Siemens 8DJH Installation And Operating Instructions Manual page 49

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH
Center of gravity
The center of gravity of a panel depends on the degree to which the panel is equipped. The
position of the center of gravity is marked with a symbol on both sides of the panel.
Fig. 24: Symbol for the center of gravity
Transport eyes
The transport eyes are pre-assembled at the factory. For delivery without low-voltage
compartment and without pressure absorber, the transport eyes must be turned before
transporting the switchgear.
1. Undo the bolt of the transport eyes
2
2. Re-tighten the bolt-and-washer assembly
Fig. 25: Turning the transport eyes
Transport facilities
Transport with pallet
Transport with fork-lift truck
Crane hook
1
Transport pallet
2
and turn the transport eyes upwards by 180°.
1
.
2
Transport with crane rod
Transport with lifting truck
Crane rod (Ø 40 mm, observe switchgear weight)
3
Transport eye
4
Transport | 5
Transport with transport eyes
49/174