Installation; Safety Instructions; Tools And Auxiliary Means; Cleaning Agents - Siemens 8DJH Installation And Operating Instructions Manual

Medium-voltage switchgear
Table of Contents

Advertisement

7 Installation

7.1 Safety instructions

7.2 Tools and auxiliary means

7.3 Cleaning agents

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH
In the instructions given in the following sections it is assumed that a new switchgear is being
installed which has not yet been connected to the mains, and is not live.
For extending or replacing parts of an existing switchgear, observe the Five Safety Rules:
Live parts
Touching live parts leads to a life-endangering electric shock. Observe the Five Safety Rules:
⇨ Isolate.
⇨ Secure against reclosing.
⇨ Verify safe isolation from supply.
⇨ Earth and short-circuit.
⇨ Cover or barrier adjacent live parts
Sharp-edged sheets
If covers have to be removed from the switchgear, sharp-edged sheets inside the switchgear
can cause cuts. Sharp-edged sheets inside the switchgear can damage cables.
⇨ Wear personal protective equipment (e.g. cut-resistant gloves and arm sleeves).
⇨ When working inside the switchgear, it must be observed that cables do not touch any
sharp-edged sheets. Cover sharp-edged spots, if required.
Sheet-metal work at the switching-device vessel
Sheet-metal work at the switchgear can cause damages to the switching-device vessel.
⇨ Do not drill into the switching-device vessel.
⇨ Remove metal cuttings, cement dust or liquids on the switching-device vessel in order to
avoid rust layers.
▪ Standard tools such as torque wrenches (6...50 Nm), various screwdrivers (slot, Philips and
Torx), various wrenches
▪ Shims with a thickness of 0.5...1 mm to compensate for floor unevenness
For protection of personnel and environment:
Read the instructions for use of cleaning agents and aids carefully.
Observe the safety instructions of the cleaning agents.
Activity
Cleaning the front covers and instrument transformers
Cleaning electrostatically stressed cast-resin insulators
or cast-resin components
Applying and wiping off liquid cleaning agent (single
use)
DANGER
CAUTION
NOTICE
INFORMATION
Cleaning agents
Mild, customary household cleaner for general
degreasing work and cleaning work (solvent-free)
Dry wiping cloths; plastic cleaner containing alcohol if
there is a lot of dirt
Lint-free cleaning paper
53/174

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents