Table 4-4: Bootp Process Verification - Agilent Technologies J3919A Installation & User Manual

NOTE

Table 4-4: Bootp Process Verification

Server
HP-UX
Bootp Server
Solaris
Bootp Server
PC
Bootp Server
Only bootpquery with bootptab entries include the ba tag.
Verification Process
Test the Bootp process by entering one of the following:
For HP-UX 9.x:
/etc/bootpquery <hardware address>
For HP-UX 10.x and 11.x:
/usr/sbin/bootpquery <hardware address>
Where <hardware address> is the MAC address of the
HP-UX workstation's LAN interface.
If available, test the Bootp process by entering:
/etc/bootpquery <hardware address>
where <hardware address> is the MAC address of the
Solaris workstation's LAN interface.
Check the C:\bootpd\bootpd.log file for the entry
"Starting bootpd..."
Bootp Server Configuration
Configuring the Bootptab File
89