Modify/View Interface Values; Fast Ethernet Telemetry Interface Configuration - Agilent Technologies J3919A Installation & User Manual

Modify/View Interface Values

After you access the Modify/View Interface Values menu, you must first select the
port that you want to configure and then configure that port. For example, the
possible options for the port parameter could be the following:
[1] 1.1/Ethernet
[2] 1.2/Serial
[3] 3.1/ATM
[4] 3.1/ATM-AL5
[5] 3.1/STS3C-STM1
The Modify/View Interface Values section is divided into the following topics.
Refer to the desired topic to modify or view your specific interface values.
"Fast Ethernet Telemetry Interface Configuration" below
"Token-Ring Telemetry Interface Configuration" on page 29
"OC-3 ATM Interface Configuration" on page 33

Fast Ethernet Telemetry Interface Configuration

Use the following procedure to configure items in the Modify/View Interface
Values menu for the Fast Ethernet Telemetry Interface:
1. Press 3 to access the Modify/View interface values menu item. The
Modify/View Interface Values menu is displayed, as shown in Figure 2-5 on
page 26.
Local Terminal Configuration
Using a Local Terminal
25