Downloading Firmware Using A Networked Pc And A Terminal; Setup Tftp Server For Downloading; Download Firmware To The Probe - Agilent Technologies J3919A Installation & User Manual

Download New Firmware

Downloading Firmware using a Networked PC and a Terminal

Downloading Firmware using a Networked PC and a
Terminal
You can download new firmware to your probe using a networked personal
computer (PC) and a dumb terminal. Before upgrading firmware, you must first
establish an IP connection between your networked PC and the probe.
The following steps are required to download firmware to the probe:
1. "Setup TFTP Server for Downloading" below
2. "Download Firmware to the Probe" below

Setup TFTP Server for Downloading

Refer to your TFTP application manuals for information on how to setup your
server for downloading a file.

Download Firmware to the Probe

Once your TFTP server is setup for downloading a file, you can download the new
firmware file to the probe.
106