Supported Mibs - Agilent Technologies J3919A Installation & User Manual

Supported MIBs

The ATMProbe uses SNMP, MIB-II, Agilent private MIB extensions, and
selected RMON MIB groups (groups 3,7,8, and 9) to provide the following
features:
Alarms
Filters
Packet Capture
Events
Log
Trap
PVC configuration
SVC configuration
Signaling Layer Statistics
Signaling Layer Historical Statistics
AAL-5 Protocol Statistics
AAL-5 Historical Protocol Statistics
Per PVC AAL-5 Protocol Statistics
Per PVC AAL-5 Historical Protocol Statistics
SVC Aggregate AAL-5 Protocol Statistics
SVC Aggregate AAL-5 Historical Protocol Statistics
* PPP refers to PPP, HDLC, or SDLC.
The ATMProbe implements groups 3, 7, 8, and 9 of RFC 1757, the Remote
Network Monitoring Management Information Base (RMON-1 MIB). Refer to
the RFC for more information.
The ATMProbe also implements the Agilent Private MIB, which contains all
ATM statistics and allows for configuration and administration of the probe. It
provides enhanced authentication features, specification of trap destinations,
remote download of new firmware revisions, serial line control, and other
features. The Agilent Private MIB is available electronically with NetMetrix.
Introduction
Probe Overview
7