Agilent Technologies J3919A Installation & User Manual page 100

Bootp Server Configuration
Bootp Server Setup on an HP or Sun System
3. For Solaris, determine the process ID for inetd by entering the following
command:
ps -ef | grep inetd
Then force inetd to re-read the inetd.conf file that you modified in Step 1 on
page 79 by giving the following command:
kill -HUP process_id
For additional information, refer to the man pages for bootpd(1M),
inetd(1M), inetd.conf(4M), ps(1M) and kill.
80