About The Information In The Following Sections; Connecting To An Oc-3 Atm Network (In-Band) - Agilent Technologies J3919A Installation & User Manual

Installation
Connecting the Probe
Figure 3-8: Connecting the Probe using Data & DB-9 Connectors

About the Information in the Following Sections

It is assumed that you understand the basic terminology and concepts of ATM
network test interfaces.
Comprehensive coverage of network test connections and physical layer testing is
beyond the scope of this Installation/User's Guide. Consequently, the information
provided here covers only the basics, and only very common or generic
connection schemes are shown.

Connecting to an OC-3 ATM Network (In-Band)

To connect the probe to an OC-3 ATM network, you connect the probe in-line
with the network connection by using the two fiber-optic connectors and a
fiber-optic cable. Figure 3-9 on page 58 shows the details of the OC-3 interfaces.
57