Performing A Semi-Attended/Attended Transfer; Conference Calls; Local Conference; Initiating A Conference By Dialing Multiple Numbers - Yealink One Talk CP925 User Manual

Procedure
1.
Select Transfer.
2.
Enter the number you want to transfer to.
3.
Select Transfer to complete the transfer.

Performing a semi-attended/attended transfer

You can transfer calls to other contacts immediately when receiving ringback or after consulting with them first.
Procedure
1.
Select Transfer during a call.
2.
Do one of the following:
•
Enter the number or select a contact from the placed call list you want to transfer the call to.
•
Select the desired contact from the Directory list.
3.
Tap # key or
4.
Do one of the following:
•
When you hear the ringback tone, select Transfer to finish the Consultative Transfer.
•
After the contact answers the call, select Transfer to finish the attended transfer (consultative transfer).

Conference calls

The phone supports creating local conference and network conference. During the conference, follow these tips:
•
Mute your microphone when you are not speaking, especially in noisy environments.
•
Avoid tapping or rustling papers near the microphone.
•
Speak in your normal voice without shouting.

Local conference

The phone supports up to six parties (including yourself) in a conference call. There are three ways to create a conference:
•

Initiating a conference by dialing multiple numbers.

•
Initiating a conference by inviting participants.
•
Merging multiple calls into a conference.
If you connect a mobile phone and PC to your IP phones, you can also create a hybrid UC conference.
Initiating a conference by dialing multiple numbers
You can initiate a conference by dialing multiple numbers, this is a convenient way to set up a local conference.
Procedure
1.
Select .
2.
Select Call multiple members? Click here >>.
3.
Enter the number of the first party then select Add Members or select a contact.
The avatar of the first party appears on the top of phone screen. You can tap the avatar to cancel the addition.
4.
Repeat the step 3 until you add all intended parties.
5.
Select to call all intended parties at the same time.
The conference is set up after the intended parties answer the call.
User guide
18