Table of Contents
Advertisement
Supported Call Features
Hold/Resume
You can place an active call on hold. At any time, at most one active call can be in progress on your
handset. You can answer or make another call while placing the original call on hold.
To put a call on Hold press Options soft key and then select Hold.
To resume the call press the Resume soft key.
If 2 calls are on hold at the same time you can use the Up/Down arrow or the Swap soft key to swap
between the two calls.
Call Mute
While you are on a call you can mute your microphone so the other party will not be able to hear
you.
To mute your microphone press the
key.
Redial a call
The redial number list stores the twenty last dialled phone numbers. When the memory of the redial
number list is full, the handset will automatically erase the oldest dialled number when a new
number is dialled.
To go to the redial list press the
Transfer a call
There are 3 different types of call transfer:
Blind Transfer
To perform a blind transfer during a call, select the Options soft key and then press Transfer. Or
you can press the
Enter the number or select the handset that you would like to transfer the call to, and then press
Transfer or the
key.
Page
16
of
27
key. To un-mute the microphone press again the same
key.
key directly.
Horizon
|
Yealink W52P Full User Guide
© Gamma 2016. All rights reserved. Confidential
Advertisement
Table of Contents
