Answering An Intercom Call; Voice Mail; Setting The Voice Mail Code - Yealink One Talk CP925 User Manual

You can pick up the target extension's incoming call by pressing the Intercom key.
Before picking up an incoming call, make sure that the directed call pickup code has been configured either for an Intercom key or for Call
Pickup feature in advance.
Check with your system administrator to find out if this feature is available on your phone.
Note: If the directed call pickup code is not set, the phone will place a call to the target extension instead of picking up an incoming call of the
target extension when you tap the Intercom key.
Procedure
1.
Tap DSSKey.
2.
Long press the Intercom key.
3. Enter the directed call pickup code in the Extension field.
4.
Select .
When the target extension receives an incoming call, the Intercom key icon of the target extension will change to
Tap the Intercom key to pick up the incoming call directly.

Answering an intercom call

By default, when there is an incoming intercom call, the phone plays a warning tone and automatically answer the
incoming call.
If your phone is set to answer intercom calls with your microphone muted, you need to tap the Mute touch key to unmute your microphone
before responding to the call.
You can configure the following behaviors when receiving an intercom call.
•
Intercom Allow
Intercom Allow feature allows the phone to automatically answer an incoming intercom call. If you disable this feature, the phone will
handle an incoming intercom call like a normal incoming call.
Note: Your system administrator can set a period of delay time before the phone automatically answers intercom calls
•
Intercom Mute
Intercom Mute feature allows the phone to mute the microphone when incoming intercom calls are answered automatically.
Note: To enable the phone to receive a new incoming call when it already has an active call, make sure that the call waiting feature is
enabled on the phone in advance.
Procedure
1.
Go to More > Features > Intercom.
2.
Make the desired changes.
3.
Select .

Voice mail

Voice mail feature allows you to leave voice mails for someone or listen to your voice mail messages on your IP phones.
This feature is set up on the server-side and not all servers support this feature.

Setting the voice mail code

If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
User guide
.
22