Mute; Holding And Resuming Calls - Yealink One Talk CP925 User Manual

Procedure
1.
Tap the mute touch key
2.
The mute touch key LED glows red.
3.
Tap the mute touch key
The mute touch key LED glows green.
Tip: You can also mute the microphone while the phone is dialing so that the other party cannot hear you when the call is
set up.

Mute

In a meeting room, if incoming calls are answered automatically on your phone, callers may hear your discussion with your colleagues. You can
keep the phone in mute to prevent this unintended situation.
The mute state of your phone persists across calls. The phone stays in the mute state until you unmute the microphone manually or until the
phone restarts.
Procedure
1.
Tap the Mute touch key
The mute icon appears on the idle screen.
2.
Tap the Mute touch key

Holding and resuming calls

You can place an active call on hold and resume the call when you are ready. When you place a call on hold, the held party may hear the music
on hold from your phone system.
Holding a call
You can place an active call on hold on your phone.
Procedure
1.
Select Hold during a call.
or during a call.
or again to unmute the call.
when the phone is idle.
again to deactivate the mute state.
User guide
15