Enabling The Phone Audio; Enabling The Phone Media; Handling A Mobile Phone Call On The Phone; Editing Device Name Of Your Phone - Yealink One Talk CP925 User Manual

Procedure
1.
Tap .
2.
Tap after the connected Bluetooth-enabled mobile phone name.
3. Turn off Mobile Contacts Sync.
The mobile contacts directory disappears from the phone directory list.
Tip: The mobile contacts directory also disappears from the phone directory list after deactivating the Bluetooth mode.

Enabling the phone audio

When you enable the phone audio, the phone can act as a speaker and microphone for your connected mobile phone.
The call is made through your mobile phone, but the audio is present on the phone and the call is also controlled by
the phone.
Procedure
1.
Tap .
2.
Tap after the connected device.
3.
Turn on phone audio.

Enabling the phone media

You can enable the Media Audio feature to use the phone as a Bluetooth speaker for your mobile phone/PC to play music.
Procedure
1.
Tap .
2.
Tap after the connected device.
3.
Turn on Media Audio.

Handling a mobile phone call on the phone

You can handle a mobile phone call on your phone, the phone acts as a speaker and microphone for your mobile phone.
Before you begin
1.
Make sure that the Bluetooth-enabled mobile phone is paired and connected to your phone.
2.
You have enabled the phone audio.
Procedure
Do the following on the phone:
•
Place a call
•
Answer a call. An incoming call to your mobile phone is also shown on the phone, you can answer the call on the phone. The contacts will
be firstly matched with those in the mobile contacts directory to present the caller identity when receiving a mobile phone call
•
During the call, you can hold/resume, mute/unmute or end the call on the phone

Editing device name of your phone

You can edit the device name of your phone for easily recognizable.
Before you begin
Make sure that the Bluetooth mode is activated.
User guide
44