Rebooting Your Phone; Resetting To Factory Settings; Updating The Phone Configuration; Clearing User's Personalized Configuration Settings - Yealink One Talk CP925 User Manual

Investigating warnings
The warning icon lets you know that your phone has one or more important issues. You can view details about warnings on the Status screen.
Procedure
1.
Go to More > Status > General.
The Warnings screen is displayed listing any issues.
Clearing warnings
You can temporarily remove the warning icon from the status bar.
However, the warning icon appears again after the phone reboots or the phone has a new warning if the issue is not solved.
Procedure
1.
Go to More > Status > General.
2.
Tap the Warning field.
3.
Tap OK.

Rebooting your phone

The improper operation may cause malfunction. If the malfunction occurs, your system administrator may ask you to reboot your phone.
Procedure
1.
Go to More > Basic > Reboot > Reboot.
The phone prompts you to reboot the phone or not.
2.
Select OK.

Resetting to factory settings

When some issues occur on your phone and you have tried all troubleshooting suggestions but still do not solve the problem, you can reset
your phone to factory configurations.
This operation will delete all your personal configuration settings, and reset all settings to the factory defaults. Check with your system
administrator if the personalized settings are kept before resetting your phone to factory set- tings.
Procedure
1.
Go to More > Advanced (default password: @N3ta!k2@2* ) > Reset Config.
2.
Select Reset to Factory Settings.
The phone prompts you to reset the setting or not.
3.
Select OK.
The phone begins resetting.
After reset, the screen prompts "Welcome Initializing...Please wait". The phone will be reset successfully after startup.
Note: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.

Updating the phone configuration

Your system administrator may ask you to update the configuration for your phone to apply any changes to system settings, which you can do
without restarting it.
Procedure
1.
Go to More > Basic > Update Configuration > Auto Provision.
2. Select OK.

Clearing user's personalized configuration settings

You can clear the personalized configuration settings manually on the phone.
Before you begin
User guide
49