Connecting A Table-Top Vtr; Connecting A Camera Control Unit - Sony DXC-327BK Operating Instructions Manual

Connections

Connecting a Table-Top VTR

Table-top VTR
Video monitor
1)
The camera cable can be extended up to 10 meters (33 feet) long.
Consult your authorized Sony dealer.

Connecting a Camera Control Unit

Connecting the CCU-M5/M5P/M7/M7P camera control unit
CCU-M5/M5P/M7/M7P
camera control unit
1)
The camera cable can be extended up to 300 m (990 feet) using the CCZZ-1B
or CCZZ-1E Cable Extension Adaptor. Consult your authorized Sony dealer.
Gamma and knee controls with the CCU-M7/
M7P connected
When the camera is connected to the CCU-M7/M7P,
the GAMMA controls and KNEE controls of the
34
to video input
connector
to microphone
input jack
CCZQ-A
camera cable
DR-100A intercome
headset (not supplied)
CAMERA
1)
CCZ-A camera cable (not supplied)
VIDEO OUTPUT
MIC OUT
CAMERA/CCU
1)
VTR/CCU/CMA
CA-537/537P
VTR SELECT switch
VTR SELECT
2
1
INTERCOM
VTR/CCU/CMA
CCU-M7/M7P do not affect the video output signal of
the camera. However, the setting value of the
GAMMA and KNEE level on the monitor screen
change.
Camera adaptor
CMA-8A/8ACE
to an AC outlet
DXC-327B/327BP
3
Set to 1.
CA-537/537P DXC-327B/327BP