ICP DAS USA VP-2117 Getting Started page 8

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Frequency
 Protocols
Modbus Master
Protocol
Modbus Slave Protocol
Modbus TCP/IP
Protocol
Remote I/O
Fbus
Ebus
SMS:
Short Message Service
User Defined Protocol
CAN/CANopen
FRnet I/O
Sending E-Mail
8
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
mode. (FAQ-112)
I-8084W: 250 kHz max. , 4-ch encoder, can be
Pulse/direction, or Up/Down or A/B phase (Quad. mode); Not
support Encoder Z-index. (FAQ-100)
I-87082W: 2-ch, 1 Hz ~ 100 kHz;
I-8084W: 8-ch, 1 Hz ~ 250 kHz;
Up to 2 COM Ports ; COM1 ~ 3 & (COM5 in multi serial port
board) can support Modbus RTU Master or ASCII Master
protocol to connect to other Modbus Slave devices, 2 ports
support up to 128 Modbus_xxx function blocks (same type).
Up to 2 COM Ports, COM1 and one of (COM2, COM3) can
support Modbus RTU Slave protocol for connecting
ISaGRAF, PC/HMI/OPC Server & MMI panels.
Support Modbus TCP/IP Slave protocol for connecting
ISaGRAF & PC/HMI. (Max. 6 connections)
One of COM2, 3 supports I-7000 I/O modules & (I-87K base
or RU-87P1/2/4/8) + I-87K High Profile I/O cards as Remote
I/O. Max. 64 Remote I/O module for one controller
Built-in COM3 Port to exchange data between ICP DAS‟s
ISaGRAF PACs.
To exchange data between ICP DAS‟s ISaGRAF Ethernet
PACs via Ethernet Port.
One of COM3 or ( COM5 in multi serial port board) can link to
a GSM Modem to support SMS. User can request data/
control the controller by cellular phone. The controller can
also send data & alarms to user‟s cellular phone. Optional
GSM Modem: GTM-201-RS232 ( 850/900/1800/1900
GSM/GPRS External Modem) or visit to
http://www.icpdas.com/products/
GSM_GPRS/wireless/GSM_GPRS_modem.htm
recommended GSM/GPRS Modem
User can write his own protocol applied at COM1 ~ COM3 (&
COM5 ~ COM16 if multi-serial port boards are plugged) by
serial communication function blocks.
Up to 3 COM Port. User can use its COM1, 3, or (COM5 ~
COM12, resides at the I-8112iW/8114W/8114iW RS-232
expansion board) to connect one I-7530 (RS-232 to CAN
converter) to support CAN/CANopen devices and sensors.
One VP-2117 supports max. 3 RS-232 Ports to connect max.
3 I-7530. Please refer to
> ISaGRAF Ver.3 (English)
Support max. 3 I-8172W FRnet Master cards to connect
FRnet I/O modules. (max. 768-ch D/I + 768-ch D/O)
Actively or passively sending E-mail via Ethernet Port through
internet. Max. 10 receivers for each sending and can send
E-mail with an attached file (Max. file size is about 488 KB).
VP-2117 Getting Started, Apr. 2010, V1.0
www.icpdas.com > FAQ > Software
> FAQ-086.
for