Connecting The I/O - ICP DAS USA VP-2117 Getting Started

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
1.

4.1.7 Connecting the I/O

Click on I/O connection tool button to get into I/O connection window. Double
click on 8th slot and select Equipments on the lower-right corner, and then
double click lcd_init : Set LCD features . Last, click OK to finish the setup.
2.
As below figure, you can use the lcd_init to change the LCD backlight brightness.
Click on lcd_bri and double-click on lcd_bright to setup the default brightness
value (range: 0 ~ 10). Set to 0: backlight off ; Set to 10: Maximum brightness.
After configuration, please click OK to confirm and then click Save to save it.
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
1.
Click "Note" for more
information.
VP-2117 Getting Started, Apr. 2010, V1.0
5.
4.
3.
2.
4-14