ICP DAS USA VP-2117 Getting Started page 65

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Both the VP-2117 PAC and the development PC MUST be set to the same serial
communication parameters. The default parameters for COM1 (RS-232) port are:
Downloading the Example Project
Before you can download the project to the controller system, you must first verify
that your development PC and the controller system are communicating with each
other. To verify proper communication, click on the Debug icon in the ISaGRAF
Programs window as shown below.
If the development PC and the VP-2117 controller system are communicating
properly with each other, the following window displayed below will appear. If there
is a previous program running in the VP-2117 PAC , the project name and the word
"active" will show on the screen).
If the message in the ISaGRAF Debugger says Disconnected , it means that the
development PC and the controller system have not established communications
with each other. The most common causes for this problem is either the serial port
cable not being properly configured, or the development PC‟s serial port
communications DO NOT match that of the VP-2117 controller system.
You may have to either change the serial port communication settings for the
development PC (which may require changing a BIOS setting) or change the Serial
Link Parameters in the ISaGRAF program. If there is a previous program running in
the VP-2117 PAC, you will need to stop that project before you can download the
example project. Click on the Stop application tool button as illustrated below to
halt any applications that may be running.
4-19
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Baudrate:
Parity:
Format:
Flow control:
Current running project
name inside the controller.
VP-2117 Getting Started, Apr. 2010, V1.0
19200
none
8 bits, 1 stop
none
Your project name in the
ISaGRAF software on the PC.