ICP DAS USA VP-2117 Getting Started page 39

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Step 3: Select COM Port and Baud Rate to search
On PC, Click on Start > All Programs > ICPDAS > DCON_Utility > Run
DCON_Utility .
1. Click COM Port menu to select the
COM Port and Baud Rate to search. You
can select multi-Baud Rate, Protocol or
Checksum conditions if you do not know
the module‟s setting, but it will spend
more time to scan the network. After
selection, click OK .
2. Click Start Search icon to begin
search module.
1
Step 4: Click Searched module ID and give the new configuration
Click when it is searched and double click module number to enter the setup
screen.
2
As screen below, you can setup the Address, Baud rate, Checksum, and then click
Setting to save.
3-17
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
2
.
1
VP-2117 Getting Started, Apr. 2010, V1.0